研究実験用総合カタログ2015 <English.ver> 124-125(126-127)

概要

  1. General Instruments
  2. Bio Technology Instrument
  1. 124
  2. 125

このページのトップへ

このページに含まれるテキストデータ(PDFから抽出された内容)

左ページから抽出された内容
Control section Usage example (Aluminum beads are sold separately) Recommended product Recommended product Aluminum Beads Dry Bath アルミビーズドライバス Characteristics ■■ Dry bath for aluminum beads. The inner tank boasts superior temperature accuracywith 5 sides made of aluminum that has good thermal conductivity. ■■ Comes with a timer function of SV start. ■■ Equipped with planar heater, it has good temperature distribution, and equal heating without any irregularity is possible. ■■ Equipped with an independent overheating prevention device as safety equipment. Product code Model Temperature range Price (Yen) 41-1751-5 ● SBD-100 (room temperature +5) to 100・C 78,000 Temperature accuracy ±0.5 to 1.0・C (at 37・C, during no load) Temperature distribution ±0.5 to 1.0・C (at 37・C, during no load) Heater 160W Maximum temperature attainment time Room temperature 23・C to 100・C in approximately 25 minutes Timer From 1 minute to 999 hours Interior tank material Aluminum Internal dimensions, capacity W109×D109×H50mm 0.6L External dimensions, weight W191×D283×H107mm 3.7kg Power source AC100V 50/60Hz 150W Accessories Polycarbonate-based clear lid (Height 30mm) *Aluminum beads are sold separately. The usage standard for aluminum beads is 800g. *Cannot be used as a constant temperature bath. Demo available Multi Mixer マルチミキサー Characteristics ■■ Reduced sound level and vibration. Realization of high-powered stirring. ■■ With only the body (no rack) itself, it can stir up to 2 96-holed micro plates, and the plates can be detached easily with only one touch. ■■ A variety of optional racks are available that support each vessel. ■■ Flat-plated attachment is the multi-supported type that does not select vessels. Product code Model Price (Yen) 41-0601-6 ● MIX-101 (rack sold separately) 84,000 Number of revolutions 1200 to 2500rpm Rotary system Turning system (vibration mechanism) Timer For 0 to 60 minutes or consecutively External dimen- sions, weight W175×D203×H156mm Approximately 6.8kg Power source AC100V 50/60Hz 0.5A ■■ Rack Product code Model Specifications Price (Yen) 41-0602-6 ● MIX-FLAT Flat-plated attachment 10,000 41-0603-6 ● MIX-MT15 30 × 1.5mL micro tubes 10,000 41-0604-6 ● MIX-MT05 48 × 0.5mL micro tubes 10,000 41-0605-6 ● MIX-CT15 12 × 15mL centrifuge tube 16,000 41-0606-6 ● MIX-CT50 8 × 50mL centrifuge tube 16,000 *The micro plate cannot be stirred when the rack is mounted. Attaching the 96-holed micro plate MIX-MT15 MIX-FLAT MIX-CT50 Related products See P. 140 for aluminum beads Related symbols Manufactured- to-order Sold by the case Packing costs extra Shipping costs extra Direct delivery Refrigerated product No refunds/ exchanges No refunds/ exchanges JR-1 JR-2 JR-3 Demo available Sample Class Clas spec mainte 124 General Instruments Bio Technology Instrument1 4 Bio Technology Instrument Centrifuges Concentrators Coolers Circulators ThermostaticBaths HotPlates, Temperature Controllers Stirrers,Mixers Homogenizers Incubators Dryingovens, Mufflefurnaces PumpBioTechnologyInstrument Microscopes, Loupes, Specimen makingdevices See P. 3 for symbol details ・
右ページから抽出された内容
Shaking Mixer シェーキングミキサー Characteristics ■■ By shaking, the slant angle and speed can be adjusted, and through seesaw movement, shaking on the diagonal direction easily allows for efficient mixing. ■■ On the surface of the shaking plate, Tupperware containers and culture flasks can be used by directly placing them on it. Also, by using the holder that is sold separately, micro tubes and centrifuge tubes can be installed too. ■■ On SHM-201, 2 varying holders can be installed. Product code Model Shaking plate dimensions (mm) Price (Yen) 41-0146-6 ● SHM-101 W155×D155 88,000 41-0147-6 ● SHM-201 W310×D155 98,000 Model SHM-101 SHM-201 Shaking speed Consecutive variable 20 to 120rpm Slant angle From a horizontal point approximately 1 to 10° (variable) From a horizontal point approximately 2 to 10° (variable) Timer For 0 to 60 minutes or consecutively Motor DC motor Acceptable weight load (g) Equal load 800 Equal load 1500 External dimensions (mm) W205×D184×H180 W320×D184×H180 Weight (kg) Approximately 3.1 (excluding the holder) Approximately 3.7 (excluding the holder) Power source (50/60Hz) AC100V 0.04A AC100V 0.05A ■■ Optional holder Product code Model Applicable vessel Price (Yen) 41-0148-6 ● SHM-MT12 12 × 1.5mL micro tubes 5,000 41-0149-6 ● SHM-TC15 3 × 15mL 8 × centrifuge tube 5,000 41-0150-6 ● SHM-TC50 3 × 50mL 4 × centrifuge tube 5,000 SHM-201 SHM-MT12 SHM-TC15 SHM-TC50 SHM-101 *The holder is sold separately. Small Rotator 小型旋回ミキサー Characteristics ■■ Its compact design without excess allows it to perfectly fit into the thermostat (usage temperature range 5 to 45・C). ■■ Due to the constant voltage control and the deceleration gear head, it exhibits a powerful revolving speed of any kind and a stable revolution can be expected. ■■ Since the holder can be freely set in the range of 0 to 90°, it can be adjusted depending on its use. Product code Model Number of revolutions (rpm) Price (Yen) 41-0181-6 ● RVM-101 1 to 12 59,000 External dimensions, weight W110×D100×H143mm *When equipping the holder, it is W140×D140×H183mm. However, depending on the angle of the holder, the depth is 122 to 140mm, and the height is 165 to 183mm. Approximately 1.5kg (excluding the holder) Power source AC100V 50/60Hz 0.04A ■■ Holder Product code Model Vessel Price (Yen) 41-0182-6 ● RVM-MT12 12 × 1.5mLor 2.0mL micro tubes 7,500 41-0183-6 ● RVM-MT20 20 × 1.5mLor 2.0mL micro tubes 11,000 41-0184-6 ● RVM-TC15 4 × 15mL centrifuge tube 7,500 41-0185-6 ● RVM-TC50 2 × 50mL centrifuge tube 7,500 Microplate shaker  マイクロプレートシェーカー Characteristics ■■ Shaker for micro-ware plate designed for 2 or 4 plates. ■■ Speed and stroke are optimally adjusted for micro-ware plate. ■■ Stable stirring is possible by electronic speed control. Product code Model Number of revolutions (rpm) Price (Yen) 41-0501-6 MTS2/4 0 to 1100 163,000 Shaking method Rotary Timer 1 to 99 minutes digital display Trajectory Diameter 3mm External dimension, weight W185×D320×H105mm·2.7kg Motor Input: 35W, output: 13.2W Power source AC100 to 115V 50/60Hz RoHS compliant *Price is exclusive of tax. Consumption tax is not included. R-2 JR-3 Demo available Sample Class Class specialist maintenance Class Class specialist maintenance RoHS compliant Poisonous and deleterious substances 125 General Instruments Bio Technology Instrument 1 BioTechnologyInstrument Bio Technology Instrument Centrifuges Concentrators Coolers Circulators ThermostaticBaths HotPlates, Temperature Controllers Stirrers,Mixers Homogenizers Incubators Dryingovens, Mufflefurnaces Pump Microscopes, Loupes, Specimen makingdevices 4 ・

このページのトップへ

  • マイバインダー

    マイバインダーは空です。

  • キーワード検索

    • 全て
    • 現在のカタログから
  • カテゴリから検索

協賛企業一覧

日本ビュッヒ

東京理化器械

エリエールビジネスサポート

IKAジャパン

三宝化成

福島工業

-->

いつでもどこでもカタログを iCata